Categories
Boot HP Computer

Boot Device Not Found HP: Working Solutions

Among the common error messages, “Boot Device Not Found HP” error is really typical, which always happens throughout the process of turning on the system. The error message appears along with different texts. If you found any of the following messages on the screen, then check out the below sections to know the ways of how to deal with the error.

  • No Boot Device Found. Press any key to reboot the machine
  • No boot device is available
  • Boot Device Not Found. Please install an operating system on your hard disk
  • No bootable device – insert boot disk and press any key

According to our experts, the reason behind the error are corrupt bootable disk. BIOS settings, hard disk connection problems, damaged or virus-infected files.

Methods to Solve the “Boot Device Not Found” Error 

Follow the below-given instructions meticulously to ensure that you can discover the specific possible ways of repairing this error. Have a glance at the below lines:

At First, Hard Reset your Laptop

The easiest solution to fix the Boot Device Not Found error is the Laptop Hard Reset. Follow these steps:

  1. Shut down your computer and then detach it from the Power.
  2. Remove the power cord.
  3. After that, open the battery.
  4. Now, locate and hold the Power button for a minute to discharge the stored energy.
  5. Put the battery back in and then reconnect the cable with the power outlet.
  6. Turn on the Laptop and then verify if the issue gets solved.

NOTE: In case, you are using the non-removable battery laptop, then leave this solution and try the below ones.

Secondly, Reset the BIOS settings

Resetting the BIOS settings is another best method to solve the Boot Device error. Below, are the steps that you need to go through to try this way.

  1. At first, close all the programs on your computer and then tap down the Windows logo key.
  2. Click on the Shutdown button. Alternatively, in case of Windows 10, click on the Power icon and then select the Shut down option.
  3. Now, wait for a minute and then press the Power button to turn on the computer. After pressing the Power button, keep pressing the F10 key to get the BIOS setup window on the screen.
  4. After that, tap down the F9 key to select and obtain the BIOS Setup Default settings.
  5. Next, tap the F10 key to save the settings.
  6. Click on Yes> Press the Enter key to continue.
  7. Now, follow the display instructions to restart your PC.

Hopefully, by resetting the BIOS settings, you can fix the Boot Device Not Found error without any problem.

Finally, Remove the Unsupported Hard Drive

Attachment of the unsupported hard drive on your computer is another reason for this error message. If this is the case, then after removing the hard drive you will get the issue solved.

  1. So, at first, press down the Power button of the computer to turn off the device forcefully.
    After that, unplug the power cable.
  2. Next, disconnect all the additional hard drive attachments.
  3. Reassemble the PC and then restart it.
  4. Now, check if your computer is working fine.

All these are the ways to fix the Boot Device Not Found error efficiently.

Categories
HP Computer

HP Update Software Utility

HP Update Software Utility service is also known as the HP Update service. Currently, the users are facing an issue with it that the users are getting the Download failed message. Are you stuck with the same issue? If, then look the below-given information which may help you out from this situation.

What is HP Update Software Utility

Your organization’s HP computer system comes with HP Update, a program that searches for and uses the most up to date firmware, vehicle drivers and utilities on your maker. By default, HP Update runs immediately and alerts you only when it locates an upgrade. If you do not desire the tool to look for updates, you can disable it entirely.

How to Remove the HP Update Software Utility

If you are getting the error message “HPSF.exe has stopped working”, then to solve this, at first, you need to uninstall the program. After that, download and install the HP Support Assistant on your computer.

Uninstall HP Support Assistant

First of all, press down the Windows logo key and the letter R key both at a time and then on the given space type control. Click on the OK button to continue.

Now, set the View by option to Large icons. Click on “Programs and Features”. From the Programs and Features window, locate and click on HP Support Assistant. Next, from the top menu bar click on the Uninstall tab and confirm the process by clicking on Yes of the confirmation window. As the HP Update Software Utility gets uninstalled successfully, restart your computer and then check if the problem gets fixed.

Download and Install the HP Support Assistant Program

Further, to use the HP Update Software Utility, you need to download the program and then install it. Below are the instructions of how you can use the HP Support Assistant.

At first, navigate to the HP Support Assistant website and then click on “Download HP Support Assistant”. After that, click on Save to start the downloading process. Now, when the downloading is done, proceed with the Run option and then follow the display instructions to complete the HP Assistant installing task.

Lastly, you need to click on Yes> Finish.

Hopefully, now the HP Assistant program is working properly.

Solve the Interrupts Issue of HP Support Assistant during Games, Movies, or TV

If you are getting updates at the time you do not want to, then you are able to do that using the HP Update Software Utility. Forward with the below-given instructions for that. 

  1. Firstly, open the HP Support Assistant Settings window.
  2. Now, set the time and day of your choice under the HP updates and messages are scheduled for section.
  3. Lastly, click on Save.

Hopefully, now will not be disturbed while doing your task.

Cannot Open HP Support Assistant: Learn the Solution

By restoring your computer to an earlier time you can fix the Cannon open HP Support Assistant issue. To know the process of how to restore, go through the below instructions.

  1. First of all, press down the Windows button along with the letter R button to open the Run bar window.
  2. In the Run bar type RSTRUI.EXE.
  3. After that, click on the OK button.
  4. Now, click on the Next button from the System Restore window.
  5. Select the date and time when your computer was worked fine> Next.
  6. Finally, to confirm your restore point date, click on the Next button.

After the restoring task is over, you will be able to use the HP Update Software Utility without any further problem.